Local Basic Operations 64
Figure 4-36
Define the period by drawing.
1) Select a corresponding date to set.
Define for the whole week: Click next to All, all the icon switches to ,
you can define the period for all the days simultaneously.
Define for several days of a week: Click before each day one by one, the
icon switches to . You can define the period for the selected days
simultaneously.
2) On the timeline, left click mouse and then drag to define a period.
There are six periods in one day, the Device starts recoding the selected event type
in the defined period. In Figure 4-37, the different color bars stand for different
record types.
Green stands for general record.
Yellow stands for MD (motion detection) record.
Red stands for alarm record.
Blue stands form intelligent record.
Orange stands for MD&Alarm record.
Purple stands for POS record.
Once the time period overlaps, the record priority: MD&Alarm > Alarm >
POS > Intelligent > MD >General.
Select a record type and then click the of the corresponding date to
clear the corresponding period.
To Next Page
Loading...
Need help?
General