Dahua Unit VTO6221E-P - 2 Login Interface; 2.1 Logging In; 2.2 Resetting Password

Login Interface 3
2 Login Interface
Logging In 2.1
Before logging in, make sure that the PC is in the same network segment as the VTO.
Open internet browser on the PC, then enter the VTO IP address in the address bar, Step 1
and then press Enter.
The login interface is displayed. See Figure 2-1.
Login interface Figure 2-1
Enter "admin" as username, then the password you set during initialization, and then Step 2
click Login.
Resetting Password 2.2
On the login interface (Figure 2-1), click Forgot Password?. Step 1
The Reset the password (1/3) dialog box is displayed. See Figure 2-2.
Reset the password (1/3) Figure 2-2
Click Next. Step 2
The Reset the password (2/3) dialog box is displayed. See Figure 2-3.