Local Setting 14
Table 4-7 Wiegand parameter
Select Input or Output according to Wiegand device type.
Select transmitting speed from 34 bit, 66 bit, and 26 bit. The larger the
value is, the faster the transmission will be.
The Wiegand signal frequency, it is 1000 by default.
The max value of Wiegand signal, it is 200 by default.
Click Save. Step 3
Face Recognition 4.7
Face recognition is available on select models.
This section introduces how to configure face recognition threshold, anti-false threshold, and
face recognition angle.
Select Local Setting > Face Recognition. Step 1
The Face Recognition interface is displayed. See Figure 4-8.
Face recognition Figure 4-8
Configure face recognition parameters. See Table 4-8. Step 2
Table 4-8 Face recognition parameter description
The larger the value is, the more similar the target and the saved face
data is required to open the door.
The larger the value is, the less the chance that the system defines a
target as human face, hence the more accurate it will be.
The larger the value is, the larger the angle that the target is allowed to
turn his face during recognition.
The quality of the captured images, the larger the value is, the better the
quality will be.
Registered image
threshold
The required image quality to register successfully, the larger the value is,
the better the quality is required to be.
Click Save. Step 3
To Next Page
Loading...
Need help?
General