Household Setting 19
3) Click Save.
The added room number is displayed. Click to modify room information, and click
to delete a room.
Adding room number in batch
1) Configure the Unit Layer Amount, Room Amount in One Layer, First Floor
Number, and Second Floor Number according to the actual condition.
2) Click the Add at the bottom position.
All the added room numbers are displayed. Click Refresh to view the latest status,
and click Clear to delete all the room numbers.
5.2.2 Modifying Room Number
On the Room No. Management interface (Figure 5-4), click . Step 1
The Modify interface is displayed. See Figure 5-6.
Modify room number Figure 5-6
You can modify the names for the room. See Table 5-2 for the details. Step 2
Click Save. Step 3
5.2.3 Issuing Access Card
You can issue card to a room, and can also set it to be the main card, or to the lost state.
On the Modify room number interface (Figure 5-6), click Issue Card. Step 1
The countdown notice is displayed. See Figure 5-7.
To Next Page
Loading...