Local Setting 6
4 Local Setting
This chapter introduces how to configure VTO type, VTO No., video and audio, access
password, system time, and security function.
General operations:
After every configuration, click Confirm to save, and click Refresh to view the latest
change.
If you click Default, all the configurations in the current page would be restored to the
default, and you need to click Confirm to save.
Basic
4.1
This section introduces the configuration of VTO device type, VTO number and auto storage.
On the main interface (Figure 3-1), select Local Setting > Basic. Step 1
The Basic interface is displayed. See Figure 4-1.
Basic Figure 4-1
Configure parameters, and for the detailed description, see Table 4-1. Step 2
Table 4-1 Basic parameter description
You can select Unit Door Station or Fence Station.
Unit Door Station: Normally installed inside the community
with a specific building number or unit number.
Fence Station: Normally installed at the community gate, and
you need to enter the building number, unit number, and room
number to call a specific room. You cannot leave message or
view contact on fence station.
Building number and unit number are available only when
other servers work as SIP server. See "6.4 SIP Server."
To Next Page
Loading...