Dahua Unit VTO6221E-P - 5.1.2 Modifying VTO

Household Setting 16
Add VTO Figure 5-2
Configure the parameters, and be sure to add the SIP server itself too. See Table 5-1. Step 3
Table 5-1 Add VTO configuration
Parameter
Description
Rec No.
The VTO number you configured for the target VTO. See the
details in "Table 4-1."
Register Password
Keep default value.
Build No.
Available only when other servers work as SIP server.
Unit No.
IP Address
The IP address of the target VTO.
Username
The user name and password for the WEB interface of the
target VTO.
Password
Click Save. Step 4
5.1.2 Modifying VTO
The VTO that is currently at use cannot be modified or deleted.
On the VTO No. Management interface (Figure 5-1), click . Step 1
The Modify interface is displayed. See Figure 5-3.