Dahua Unit VTO6221E-P - 3 Main Interface

Main Interface 5
3 Main Interface
Log in the web interface of the VTO, and then the main interface is displayed. See Figure 3-1.
Main interface Figure 3-1
For the introduction of the main interface, see Table 3-1.
Table 3-1 Main interface introduction
No.
Function
Description
1
General
function
These buttons are displayed all the time
Click to change the password and your

Email address.
Click to go to the main interface.

Click to log out, reboot the VTO or restore

the VTO to factory settings.
2
VTO
information
You can view the general information of the VTO,
including building No., unit No., device type, and VTO
No..
3
System
information
You can view the software version, MCU version, and
security baseline version.
4
Config
manager
Select Device Info or User Info, and then you can
export the VTO configuration or user information to the
PC or import them from it.
5
Function area
Click the buttons to go to the corresponding menu.