Dahua VTO2111D-WP

11
Step 3. Click .
After you have modified IP address, WEB page will reboot and go to the new IP address
page.
Parameter Note
IP Address
Enter corresponding number to change IP address.
Subnet Mask
According to actual condition, set subnet mask which prefix is
number, enter 1～255，
subnet mask prefix has a specific network
link, which includes one layer structure in general.
Default Gateway
According to actual condition, it must be in the same segment
with IP address.
MAC Address
Display device MAC address..
DNS Address
Enter rules DNS server IP address.
DHCP
Enable, auto get IP function.
Default Gateway
 Wired, by default select Ethernet card 1.
 Wireless, by default select Ethernet card 2.
Default
Click “Default”, restore all parameters in the page to default.
Refresh
Click “Refresh”, refresh current page.
Chart 5-8
5.2.4.2 FTP
FTP server is used to store record, snapshot picture and etc. User can login FTP server to
view and get photo or image.
Warning:
You must purchase or download FTP tool, and install the software into PC.
Step 1. You can go to System Config>Network>FTP, to set local FTP network parameter.
See Figure 5-12.
Figure 5-12
Step 2. Configure parameters, see Chart 5-9.