17
5.2.8 WIFI Info
Note:
Only some models support WIFI function.
To configure WIFI:
Step 1. Go to System Config>WIFI Info>WIFI Info.
Step 2. Click Open WLAN, and system searches and displays available WIFI, see Figure
5-20.
Figure 5-20
Step 3. Click
of WIFI you want to connect. System shows Connection interface, see
Figure 5-21.
Figure 5-21
Step 4. Enter WIFI password, click OK to complete device WLAN connection.
Now System Config>Network Config>TCO/IP interface shows Ethernet card 2
connection.
5.3 Info Search
You can search and export VTP unlock, call and alarm record in Info Search interface.
To Next Page
Loading...
Need help?
General
