Dahua VTO2111D-WP User Manual

3
2.2 Rear Panel
Device rear panel is in Figure 2-2. Description of each component is in Chart 2-2.
Figure 2-2
Chart 2-2
No.
Component Name
Note
1 Bracket Position Bracket used to fix device and wall.
2
Vandal-proof
Switch
When villa VTO is forced to leave wall, it will alarm and
send alarm to MGT center.
3
Alarm
Input/output
Interface
1-ch alarm input.
4 RESET Key
 Shortly press this key to config reset WIFI.
 Long press this key for 10s
, system will restore
default settings.
5 RJ45 Interface Standard Ethernet cable, support POE power.
6
Power Input
Interface
DC 12V input, support 9V-26V
wide voltage, with
anti-reverse connection.

Dahua VTO2111D-WP Specifications

General

Brand	Dahua
Model	VTO2111D-WP
Category	Intercom System
Language	English