Dahua VTO2111D-WP

16
Figure 5-18
Step 2. Check Change Password box.
System shows Old Password, New Password and Confirm Password.
Step 3. Configure interface parameter.
Step 4. Click OK.
5.2.7 IPC
If the VTH has configured with IPC info, you can view IPC video image via corresponding
VTH. It supports up to 20 IPCs.
You can go to System Config>IPC info interface, view and modify all IPC info.
Step 1. Select System Config>IPC info.
Step 2. Click
.
Modify IPC info. See Figure 5-19.
Figure 5-19
Step 3. Refer to Chart 5-11.
Parameter
Note
IPC Name
IPC name.
IP
Address
IP address of IPC.
Username
Login username of password of IPC WEB.
Password
Chart 5-11
Step 4. Click .