9 | Electrical installation
Installer reference guide
108
ERGA04~08EAV3(A) + EHVZ04+08S18+23EA6V+9W
Daikin Altherma 3 R F
4P629093-1 – 2020.08
a Installation of EKRP1AHTA is required.
3 Fix the cable with cable ties to the cable tie mountings.
9.3.9 To connect the safety thermostat (normally closed contact)
1 Open the following (see "7.2.4To open the indoor unit"[451]):
1 Top panel
2 User interface panel
3 Upper switch box cover
Main zone
Wires: 2×0.75mm²
—
2 Connect the safety thermostat (normally closed) cable to the appropriate
terminals as shown in the illustration below.