14 | Troubleshooting
Installer reference guide
211
ERGA04~08EAV3(A) + EHVZ04+08S18+23EA6V+9W
Daikin Altherma 3 R F
4P629093-1 – 2020.08
14 Troubleshooting
Contact
For the symptoms listed below, you can try to solve the problem yourself. For any
other problem, contact your installer. You can find the contact/helpdesk number
via the user interface.
1 Go to [8.3]: Information > Dealer information.
In this chapter
14.1 Overview: Troubleshooting .................................................................................................................................................... 211
14.2 Precautions when troubleshooting........................................................................................................................................ 211
14.3 Solving problems based on symptoms................................................................................................................................... 212
14.3.1 Symptom: The unit is NOT heating or cooling as expected .................................................................................. 212
14.3.2 Symptom: Hot water does NOT reach the desired temperature ......................................................................... 213
14.3.3 Symptom: The compressor does NOT start (space heating or domestic water heating) .................................... 213
14.3.4 Symptom: The system is making gurgling noises after commissioning................................................................ 213
14.3.5 Symptom: The pump is making noise (cavitation) ................................................................................................ 214
14.3.6 Symptom: The pressure relief valve opens ........................................................................................................... 214
14.3.7 Symptom: The water pressure relief valve leaks................................................................................................... 215
14.3.8 Symptom: The space is NOT sufficiently heated at low outdoor temperatures .................................................. 215
14.3.9 Symptom: The pressure at the tapping point is temporarily unusually high ....................................................... 216
14.3.10 Symptom: Decoration panels are pushed away due to a swollen tank................................................................ 216
14.3.11 Symptom: Tank disinfection function is NOT completed correctly (AH-error) .................................................... 216
14.4 Solving problems based on error codes................................................................................................................................. 217
14.4.1 To display the help text in case of a malfunction.................................................................................................. 217
14.4.2 Error codes: Overview............................................................................................................................................ 218
14.1 Overview: Troubleshooting
This chapter describes what you have to do in case of problems.
It contains information about:
▪ Solving problems based on symptoms
▪ Solving problems based on error codes
Before troubleshooting
Carry out a thorough visual inspection of the unit and look for obvious defects such
as loose connections or defective wiring.
14.2 Precautions when troubleshooting
WARNING
▪ When carrying out an inspection on the switch box of the unit, ALWAYS make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.
▪ When a safety device was activated, stop the unit and find out why the safety
device was activated before resetting it. NEVER shunt safety devices or change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.
DANGER: RISK OF ELECTROCUTION
To Next Page
Loading...
