Daikin Altherma 3 R F EHVZ04S18E 6V Series - To Close the Indoor Unit; Mounting the Outdoor Unit; About Mounting the Outdoor Unit

7 | Unit installation
Installer reference guide
54
ERGA04~08EAV3(A) + EHVZ04+08S18+23EA6V+9W
Daikin Altherma 3 R F
4P629093-1 – 2020.08
1
2
2×
T25
3 Place the switch box lower on the unit. Use the 2 hinges located lower on the
unit.
3
3
7.2.6 To close the indoor unit
1 Close the cover of the switch box.
2 Put the switch box back into place.
3 Reinstall the top panel.
4 Reinstall the side panels.
5 Reinstall the front panel.
6 Reconnect the cables to the user interface panel.
7 Reinstall the user interface panel.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 4.1N•m.
7.3 Mounting the outdoor unit
7.3.1 About mounting the outdoor unit
When
You have to mount the outdoor and indoor unit before you can connect the
refrigerant and water piping.