Daikin BACnet Series - Setting Time and Date

IO-DAPPS www.daikinac.com 16
Set the Time and Date
Seng the me and date requires entering Password 2.
NOTE: If the BACnet™ Thermostat is connected to a BACnet
network that includes a me service master, the me and
date are automacally set to the network me and date.
Table 9: Set the Time and Date
Procedure Steps Display
Starng display
1. Start at the temperature display.
2. Enter Password 2. The display changes to the MAIN menu display.
Select the SCHEDULE menu
1. From the MAIN menu, press either the ▲ or ▼ buon to
select SCHEDULE.
2. Press Enter. The SCHEDULE menu opens.
3. Choose SET CLOCK and then press Enter. The SET CLOCK
menu opens.
Choose a clock funcon to set.
Choose one of the features in the SET CLOCK menu to change the
date, me, or Daylight Saving Time (DST) seng.
• DATE – The current calendar date.
• TIME – Time is set according to a 12-hour clock.
• DST ENABLE – Set to TRUE to enable Daylight Saving Time and
FALSE to use standard me year-round.
• DST AUTO – When set to TRUE, the BACnet Thermostat
automacally calculates the start and end dates from relave
dates. For example, set DST START to the rst Sunday in March
instead of a calendar date.
• DST START and DST END – Enter the dates and me to begin
observing DST. If DST AUTO is set to TRUE the dates are relave;
if set to FALSE the date is a calendar date.
Program Set-Up