Daikin BRC2E52C - Page 22

Operation manual BRC2E52C7 / BRC3E52C7
21
4P368042-1 - 2014.02
Basic Operation Method
Cool/Heat Selection Eligibility
• "Cool", "Heat" or "Auto" mode can only be set by the remote controller for which the cooling/
heating selection eligibility is set.
1.
The remote controller with
the selection eligibility
Set to "Cool", "Heat",
"Dry" or "Auto" mode.
Other remote controllers
(without "
"
(Changeover under
control) displayed)
(with "
"
(Changeover under
control) displayed)
• The air conditioner will go into the
mode set in the remote controller with
the selection eligibility. No other modes
are available.
• The air conditioner, however, can be
switched to Fan Only mode or from
Cool to Dry mode.
2.
The remote controller with
the selection eligibility
Set to "Fan" mode.
Other remote controllers
(without "
"
(Changeover under
control) displayed)
(with "
"
(Changeover under
control) displayed)
• The air conditioner cannot be set to
other modes except Fan Only mode.