Installation Manual 3P581074-2D
DGE601A52
43English
NOTE
[Group] is not displayed when the DGE601A51 is not powered on.
Power on the DGE601A51 and wait for a while before trying to operate the remote
controller.
[Group] is also not displayed when the DGE601A51 is not communicating with the
indoor units normally. Check that the cables are connected correctly.
5. Using the
and buttons, move to .
<Step 5>
-
6. Press the button.
The current address setting is displayed.
<Step 6>
-
7. Using the and buttons, move to .
Press the
button.
<Step 7>
-
01_EN_3P581074-2D.indd 43 2021/06/25 14:12:13
To Next Page
Loading...
