Daikin EUWA/Y5-30HB/C(Z) - How to Read or Adjust Parameter Settings: the Programming Procedure

ESIE98–06A The Controller for the EUWA/Y5-10HB(Z) Chillers
Part 2 – Functional Description 2–23
3
2
4
5
1
2.6 How to Read or Adjust Parameter Settings: the Programming Procedure
Programming
procedure
■ After 5 seconds the display starts blinking when no buttons are pressed.
■ You can exit at every step by leaving the buttons untouched for 1 minute. The modifications will
not be saved.
Do you want access to all parameters?
BEGIN
Enter the user-password 22 with the
u and d keys
Press
s.
Select the parameter using the
u and d keys.
Press
s to display the value.
Do you want to adjust the value?
Adjust the value using the u and d keys.
Press
s to display the parameter.
Do you want to select another parameter?
Press p to save and exit.
END
Press
s for 5 seconds to access only
direct parameters.
Press p for 5 seconds.
NO
NO
YES
YES
YES
NO