ESIE98–06A The Controller for the EUWA/Y15-30HC(Z) Chillers
Part 2 – Functional Description 2–33
3
2
4
5
1
3.9 e User Settings Menu
Password You need the password to enter this menu.
Menu description This menu allows a full customizing of the units and provides the following 6 screens:
Screen 1 This screen provides the ability to activate remote control:
Screen 2 This screen provides the ability to activate manual control mode:
Screen n° Display Description See page
1 REMOTE CONROL To activate remote control. page 2-33
2 MANUAL SETINGS To adjust and activate manual control mode. page 2-33
3 THERM. SETINGS To adjust the thermostat settings. page 2-34
4 BMS - SETTINGS To adjust the BMS settings. page 2-34
5 SETPOINT - PASSWORD To assign password protection to the set
points menu.
page 2-34
6 SENSOR ACCURACY To adjust the sensor accuracy. page 2-35
Line n° Display Description Possible settings
1 REMOTE CONTROL screen title
2 REMOTE ON/OFF remote start/stop Y/N
3 REMOTE COOL/HEAT remote cool/heat Y/N
Line n° Display Description Possible settings
1 MANUAL SETTINGS screen title
2 FANSPEED fan speed low / medium / high / very
high
3 C1/ C2/ C3 status of the circuits on / off
4 PRESENT MODE control mode manual / auto