Daikin FTKS20CVMB(9) - Removal of Electrical Box

SiENBE04-512A Outdoor Unit / ARK(X)S-C
Removal Procedure 169
2.2 Removal of Electrical Box
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
 Remove the top panel.
 Disconnect the connector
for fan motor.
1. Remove the electrical
box.
1
Disconnect the 2
reactor harnesses.
2
Disconnect the relay
connector for
compressor lead wire.
3
Disconnect the
connector for four way
valve (S80).
 When reassembling, coil the
excessive lead wire and
hang the loop on the hook.
S80
(R3260)
SiENBE04-512A.book Page 169 Friday, October 5, 2007 1:49 PM