Daikin FTKS20CVMB(9) - Removal of Propeller Fan and Fan Motor

SiENBE04-512A Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C
Removal Procedure 197
3.5 Removal of Propeller Fan and Fan Motor
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1. Remove the motor
assembly.
1
Remove the 2 screws
at the lower part of the
fan motor assembly.
2
The assembly has the
hooks at its bottom. Lift
it up and pull it toward
yourself to unhook.
 When fitting the assembly,
fasten the hooks (at 2
positions) of the lower part
of the partition plate as they
were.
Hook
Hook
(R4470)
SiENBE04-512A.book Page 197 Friday, October 5, 2007 1:49 PM