Daikin FTKS20CVMB(9) - Auto Dry Cool Heat Fan Operation

SiENBE04-512A Instruction
System Configuration 75
2.4 Auto y Dry y Cool y Heat y Fan y Operation
The air conditioner operates with the operation mode of your choice. From
the next time on, the air conditioner will operate with the same operation
mode.
 To start operation
1. Press “MODE selector button” and select
a operation mode.
• • Each pressing of the button advances the
mode setting in sequence.
: AUTO
: DRY
: COOL
: HEAT
: FAN
<ATKS>
<ATXS>
2. Press “ON/OFF button” .
• The OPERATION lamp lights up.
 To stop operation
3. Press “ON/OFF button” again.
• Then OPERATION lamp goes off.
 To change the temperature setting
4. Press “TEMPERATURE adjustment
button”.
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FA N SWING
SILENT SENSOR
ON CANCEL
OFF
R
2, 3
1
4
5
ON
OFF
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable. Press “ ” to raise the temperature and press
“”
to lower the temperature.
Set to the temperature you like
C
SiENBE04-512A.book Page 75 Friday, October 5, 2007 1:49 PM