Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C SiENBE04-512A
200 Removal Procedure
3.6 Removal of Compressor Sound Insulation Pad
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1. Remove the right side
panel.
Preparation
Remove the electrical box
according to the removal of
electrical box.
1
Dismount the right side
plate by removing the
screw.
2
Remove the outdoor air
thermistor.
The thermistor assembly is
a set of the outdoor air
thermistor, heat exchanger
thermistor and discharge
pipe thermistor.
3
Remove the 2 screws
at the back of the right
side panel.
Binding band
(R4481)
SiENBE04-512A.book Page 200 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...
