SiENBE04-512A Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C
Removal Procedure 199
3. Remove the fan motor. Pass the lead wire along the
back of the motor. (Be
careful not to get the wire
caught by the propeller fan.)
1
Pry up the hook which
fixes the lead wire and
draw out the lead wire.
2
Remove the 2 screws
of the fan motor.
3
Remove the fan motor.
4
Dismount the propeller
fan by removing the
screw.
Step Procedure Points
Fixing hook
Lead wire Propeller fan
(R4476)
SiENBE04-512A.book Page 199 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...
