Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C SiENBE04-512A
198 Removal Procedure
3
Lift up the fan motor
assembly and remove
it.
2. Remove the propeller fan. Be careful of the fan fixing
nut, which is of left-hand
thread.
1
Dismount the propeller
fan by removing the
washer faced nut with
use of an open-ended
wrench.
Mount the fan propeller to
the fan motor so that the "z"
mark should face upward.
Step Procedure Points
M10
(R4473)
(R4474)
Horizontal face
goes upper side
The dot mark goes
vertically above the center.
SiENBE04-512A.book Page 198 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...
