SiENBE04-512A Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C
Removal Procedure 185
3.2 Removal of Bell Mouth
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1
The bell mouth is
attached to the front
panel with 2 screws and
4 hooks.
Dismount the bell mouth
from the front panel after
removing the 2 screws at the
lower side.
2
Remove the 2 screws
and unfasten the 4
hooks, and remove the
bell mouth by pulling it
toward yourself.
Unfasten the hook B by
sliding the bell mouth in the
arrow direction.
Hook A
Screw
Hook B
(R4433)
SiENBE04-512A.book Page 185 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...
