Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C SiENBE04-512A
186 Removal Procedure
3.3 Removal of PCB
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1
To remove the drip
proof plate, unfasten
the hooks at 2
positions.
2
The other hooks are
unfastened when the
drip proof plate is lifted
by holding its right side.
Hooks
(R4436)
Drip proof plate
(R4437)
SiENBE04-512A.book Page 186 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...
