Daikin Intelligent Touch Manager DCM601A71 - Page 233

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
232
(4)
(5)
(6)
(7)
(8)
(9)
Set up the energy type for which to plot the energy budget/actual management graph.
(4) is the list of registered energy types.
Perform the intended operation by touching the relevant button on the right.
(5) Create button
Creates a new energy type. You can register up to 30 energy types including the power, gas and
water registered by default.
Enter a name in the Name Input dialog that appears. Touch the OK button to register the name
in (4) as a new energy type.
You can name the energy type using up to 16 characters.
(6) Copy button
Creates a new energy type by copying the selected energy type.
Enter a name in the Name Input dialog that appears. Touch the OK button to register the name
in (4)
.
You can name the energy type using up to 16 characters.
(7) Delete button
Deletes the selected energy type.
(8) Rename button
Renames the selected energy type.
Enter a name in the Name Input dialog that appears. Touch the OK button to change the name.
You can name the energy type using up to 16 characters.
You cannot change the name of energy types registered by default.
(9) Edit button
Displays the Energy Type/CO
2
Conversion Factor screen that allows you to edit the selected
energy type.