Daikin Intelligent Touch Manager DCM601A71 - Page 234

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
233
(11)
(10)
(12)
(13)
Sets up details for the selected energy type.
In the combo box (10), select the energy type from Power, Gas and Water.
Select the unit (11) from the candidate corresponding to the selected Energy Type (10) in the
combo box. The unit is xed for each Energy Type: it is kWh for power, and m
3
for gas and water.
Set the CO
2
Conversion factor in (12).
Touch the Modify button and enter the conversion factor in the Numerical Input dialog that
appears. You can enter a value in the 0 to 9999.999 range, in increments of 0.001. The unit is
displayed in accordance with the unit selected in (10).
If the new energy conversion type is registered in the Energy Conversion Type screen, enter the
new conversion factor in (13).
Touch the Modify button and enter the conversion factor in the Numerical Input dialog that
appears. You can enter a value in the 0 to 9999.999 range, in increments of 0.001. The unit is
displayed in accordance with the unit selected in (10).
Touch the OK button to save the settings and return to the Energy Type screen.
When nished, touch the OK button to save the settings and return to the Display mode screen.
For information on registration of new conversion types, consult a service person.
NOTE