User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
41
• R/C Prohibition Tab
Enables/disables remote controller of the indoor unit, Ventilator and area.
Change settings by selecting the relevant check boxes.
(1)
(2)
(3)
(1) Start/Stop
Sets up whether starting/stopping the management point from the remote controller will be
enabled or disabled.
Permitted: Enabled.
Stop Only: Only stopping is enabled.
Prohibited: Disabled.
(2) Operation Mode
Sets up whether changing the operation mode from the remote controller will be enabled or
disabled.
Permitted: Enabled.
Prohibited: Disabled.
(3) Setpoint
Sets up whether changing the management points’ setpoint from the remote controller will be
enabled or disabled.
Permitted: Enabled.
Prohibited: Disabled.
To Next Page
Loading...
