User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
42
• A/C Tab
Sets up the indoor unit.
Change settings by selecting the relevant check boxes. The range of values and items you can
set up will depend on the selected equipment.
(1)
(2)
(3)
(4)
(6)
(5)
(1) Operation Mode
Changes the operation mode.
Select and set up a value from Fan, Cool, Heat, Dependent, Automatic, and Dry.
• Dependent means either Cool or Heat. This is because the operation mode follows the
Cool or Heat operation mode set up in the air conditioner with Changeover option.
• Setting up “Dry” in an indoor unit with Changeover option does not change the operation
mode of indoor units without Changeover option that belong to the same Outdoor Unit
group and are operating in Cool or Dry mode.
NOTE
(2) Setpoint
Sets up the temperature.
(3) Timer Extension Settings
Enables or disables the Timer Extension function.
To Next Page
Loading...
