EasyManua.ls Logo

Daikin iTM plus - Page 3

Daikin iTM plus
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Manual 3P291714-4
DCM601A72 iTM plus adaptor
3
English
“All phases of the eld-installation, including, but not limited to, electrical, piping, safety,
etc. must be in accordance with manufacturer’s instructions and must comply with national,
state, provincial and local codes”
Read these SAFETY CONSIDERATIONS carefully before installing the controller.
After completing the installation, ensure that the unit operates properly during the startup
operation.
Train the customer to operate and maintain the unit. Inform customers that they should
store this Installation Manual with the Operation Manual for future reference.
Always use a licensed installer or contractor to install this product. Improper installation
can result in water or refrigerant leakage, electrical shock, re, or explosion.
Meanings of WARNING, CAUTION, and NOTE Symbols.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
NOTE
Indicates situations that may result in equipment or prop-
erty-damage accidents only.
WARNING
Only qualied personnel must carry out the installation work.
Consult your Daikin dealer regarding relocation and reinstallation of the con-
troller.
Improper installation work may result in leakage, electric shocks or re.
Install the controller in accordance with the instructions in the installation man-
ual.
Improper installation may cause electrical shocks or re.
Use only specied accessories and parts for installation work.
Failure to use specied parts may result in water leakage, electric shocks, re, or the
unit falling.
Do not disassemble, reconstruct, or repair.
Electric shock or re may occur.
Make sure that all wiring is secured, that specied wires are used, and that no
external forces act on the terminal connections or wires.
Improper connections or installation may result in re.
Before touching electrical parts, turn off the unit.
Safety Considerations
01_EN_3P291714-4.indd 3 3/26/2012 5:00:44 PM

Table of Contents

Related product manuals