Daikin One+ - Mounting the Daikin One+ Smart Thermostat

12
Standard Surface Mount Optional Flush Mount
72
°
The Daikin One+ smart thermostat comes
with an attractive surface mount and trim
bezel as standard.
Mounting the Daikin One+ Smart Thermostat
» You do not need the trim plate to
mount the thermostat.
» Screws included are designed to
mount in sheetrock or studs
» Its recommended to use the screws
provided with Daikin One+ packaging
for best results
The Daikin One+ smart thermostat also
offers a flush mount installation option
to provide homeowners with a modern
built-in style option.
Use included screws
» Mounting the thermostat will be leveled:
– Approximately 5’ from the floor.
– On an interior wall using the included screws.
– There are two options for mounting:
» A template for marking a drywall
cutout is included.
» Use a stud and wire finder to verify the
thermostat can be placed in desired
location on the wall.
» Allow a minimum 1 inch clearance
between the desired location and stud
for tightening and leveling purposes.