Daikin SA R32 Sky-Air RZAG-L - Part 2. Troubleshooting; Error Code Check Procedures

ESIE16-03B | Part 2. Troubleshooting 2.1. Error codes check
22/08/16 | Version 1.1 Page 15
SA R32 Sky-Air RZAG-L
Part 2. Troubleshooting
This part contains the following chapters:
2.1. Error codes check
2.1.1. Error codes via remote controller
2.1.1.1. Error codes via wired remote controller BRC1E
2.1.1.1.1 How to retrieve error codes
The following message will be displayed on the screen when a malfunction or a warning occurs during operation.
If an error or warning is present, it will be displayed on the user interface screen: for more information about troubleshooting, refer
to "Error based troubleshooting" on page 23.
Error codes check ................................................................................................................................................................................15
Error based troubleshooting .................................................................................................................................................................23
Symptom based troubleshooting..........................................................................................................................................................44
Component checklist............................................................................................................................................................................45
Other capacity range ............................................................................................................................................................................59
1. Screen 3. ‘menu’ button
2. Operation lamp 4. ‘cancel’ button
Operation Status Display
Abnormal shut-down The system stops operating. The operation lamp (green) starts to
blink. The message “Error: Press
Menu button” will appear and blink at
the bottom of the screen.
Warning The system continues its operation. The operation lamp (green) remains
on. The message “Warning: Press
Menu button” will appear and blink at
the bottom of the screen.
1
2
3
4