Daikin SA R32 Sky-Air RZAG-L - Figure 3-24: Removing the Main PCB Assembly

ESIE16-03B | Part 3. Repair 3.3. Unit specific repair procedures
Page 90 22/08/16 | Version 1.1
SA R32 Sky-Air RZAG-L
Figure 3-24: Removing the main PCB assembly
16. Cut the tie wraps (1) that fix the protection sheet (2); remove the protection sheet (2).
17. Cut the tie wrap (3).
18. Loosen and remove the 2 screws (4) that fix the wiring.
1. Protection sheet 7. Screw
2. Terminal block 8. Screw
3. Tie wrap 9. Cable clamp
4. Connectors 10. Compressor connector
5. Main PCB 11. Wiring
6. 4-way valve coil 12. Lid
1 64
3
3
4
11
7
2
5
8
7
12
7
10
4
9