Daikin SA R32 Sky-Air RZAG-L - Figure 3-4: Removing the Front Plate

ESIE16-03B | Part 3. Repair 3.3. Unit specific repair procedures
Page 68 22/08/16 | Version 1.1
SA R32 Sky-Air RZAG-L
Figure 3-4: Removing the front plate
7. Loosen and remove the 11 screws (1) that fix the front plate assembly (3).
8. Loosen and remove the screw (2) that fixes the front plate assembly (3).
9. Lift the front plate assembly (3) and remove it from the unit.
Figure 3-5: Removing the front plate assembly
1. Screw 2. Front plate
CAUTION
The screw (2) has a different length.
1. Screw 3. Front plate assembly
2. Screw
2
1
1
1
3
1
2
1