Daikin SA R32 Sky-Air RZAG-L - Figure 3-26: Stripping the Main PCB Assembly (Rear)

ESIE16-03B | Part 3. Repair 3.3. Unit specific repair procedures
Page 92 22/08/16 | Version 1.1
SA R32 Sky-Air RZAG-L
Figure 3-26: Stripping the main PCB assembly (rear)
Installation
1. Proceed in reverse order.
1. Screw 4. Cable clamp
2. Tie wrap 5. Electrical noise filter PCB
3. Standoff
1
2
3
5
3
2
4
3