Daikin SA R32 Sky-Air RZAG-L - Page 18

ESIE16-03B | Part 2. Troubleshooting 2.1. Error codes check
Page 18 22/08/16 | Version 1.1
SA R32 Sky-Air RZAG-L
2.1.1.2.2 How to reset error codes
In "Error based troubleshooting" on page 23 you find a description of how to reset the specific error or warning.
1 Press INSPECTION/TEST button.
Normal status
Enters inspection mode from normal status
when the INSPECTION/ TEST button is
pressed.
When MODE selector button
is pressed or no button is
pressed for 1 minute, equip-
ment returns to normal status.
3 Press
MODE
selector
button.
5 Press MODE selector button.