Daikin SV1A25AJV1B - 11 About the Box; To Handle the Unit

11 | About the box
Installer and user reference guide
35
SV1A25AJV1B+SV4~8A14AJV1B
VRV 5 safety valve unit
4P749917-1 – 2023.09
11 About the box
NOTICE
Before installation, check the packaging and parts for damage. Make sure that the
shipment is complete.
Keep the following in mind:
▪ At delivery, the unit MUST be checked for damage and completeness. Any
damage or missing parts MUST be reported immediately to the claims agent of
the carrier.
▪ Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪ Prepare in advance the path along which you want to bring the unit to its final
installation position.
In this chapter
11.1 To handle the unit .................................................................................................................................................................. 35
11.2 To unpack the unit.................................................................................................................................................................. 36
11.3 To remove the accessories ..................................................................................................................................................... 39
11.1 To handle the unit
▪ For easier manual carrying of the SV6~8A, only cut the 2 middle straps to remove
the pallet while keeping the unit in its cardboard packaging.
▪ When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright.
Do NOT step onto the unit.
Use gloves when handling the unit
NOTICE
When you carry or manipulate the unit, never tilt it more than 70 degrees in any
direction.
70°max.
▪ Optionally: As long as the SV6~8A is attached to a pallet, you can use a forklift.
Move slowly when transporting the unit.