Daikin SV1A25AJV1B - Page 78

14 | Unit installation
Installer and user reference guide
78
SV1A25AJV1B+SV4~8A14AJV1B
VRV 5 safety valve unit
4P749917-1 – 2023.09
▪ Position the wire fixing plate over the screws and slide it in place. Make sure
the backside is aligned properly with the insulation of the switch box, in
order to make it airtight.
▪ Tighten the two screws.
PH2
SW8
1
2×
≤ 3.2 N•m
2
2
4 Attach the damper wires.
▪ Attach the damper wire on the refrigerant piping, in the indicated places.
Make sure the wire is tight, but do not pull on it excessively.
▪ Leave 20cm of wire between the fixation on the pipe and the entry into the
switch box in order to be able to put back the switch box.
▪ Bundle the damper wire if needed.
SV1A
ba
bb
b
SV4A
ba
bb
b
SV6A
b
b
a