10 Piranha2 User’s Manual
Specification Units Min Max
40 MHz
Notes
Temperature drift before
recalibration,
(recommendation)
°C 10
Sensor Alignment
x,y um ±175
z mm ±0.25
θz
° ±0.6
Note that the environment conditions represent the state of the environment when the
camera was being tested. Typical results are the average values obtained with at a 1kHz
line rate and 30°C. Maximum results represent the worst case results from any camera
operating at 50°C with a 1kHz line rate.
03-32-00493-11 DALSA
To Next Page
Loading...
