Spyder3 GigE Vision User Manual
03-032-20027-02 DALSA
86
end. The goal is to prevent solvent from evaporating from the window surface, as this
will end up leaving residue and streaking behind.
8. Repeat steps 2-4 using a clean tissue until the entire window has been cleaned.
9. Blow off any adhering fibers or particles using dry, filtered compressed air.
Horizontal Lines or Patterns in Image
A faulty or irregular encoder signal may result in horizontal lines due to exposure time
fluctuations; ensure that your exposure time is regular. If you have verified that your
exposure time is consistent and patterns of low frequency intensity variations still occur,
ensure that you are using a DC or high frequency light source.
To Next Page
Loading...
Need help?
General
