Dancutter DC SUPER FLEX - 7 User Instructions

10
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
Place the hose reel where the work is to be done.
Connect the accompanying supply cable to 110/230
VAC and to the control unit’s outlet. Similarly, connect the
orange signal cable on the hose reel to the control unit.
Make sure that both tank ball valves are closed.
Now, connect compressed air from the compressor to
the hose reel’s combination water separator/oil lubrica-
tion unit. (7.1.1: “3”).
We advise having a refrigerated dryer mounted on the
compressor at all times to minimise moisture content so
it never exceeds 20 g/m3.
7.0 User instructions
CLOSED