Dancutter DC SUPER FLEX - 2 Model Type; 3 Specifications; 4 Safety Instructions

4
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
Identication:
System Type: Mobile cutter unit
Model: DC SUPER FLEX 25 OR 50 METERS
• Only start the Grinder when the cutter is in the pipeline.
• Remove the air connection when the cutter is rolled back
onto the rack.
• Removetheairconnectionbeforerellingwithwasher
uid.
2.0 Model Type
3.0 Specications
4.0 Safety Instructions
• Screws, adapter, cutting tools, etc. must be inspected
weekly for wear and damage and must be replaced or
tightened if necessary.
• Place a refrigeration dryer between the compressor and
the cutter system.
• If the rack is to be placed on its side, the oil lubricator
glass MUST be removed (7.1.1).
EXTERNAL DIAMETER: 50 MM GRINDER: 15000 RPM
AIR PRESSURE:
10 BAR - 145 PSI
POWER SUPPLY:
110 / 240 VAC - LN
WEIGHT:
25 M: 58 KG
50 M: 71 KG
L: 1000 MM - B: 550 MM -
H: 1030 MM
AIR SUPPLY: 650 L/MIN
SUPPLY HOSE:
25 M OR 50 M
STAINLESS STEEL ALLOY
AND ALUMINIUM