Dancutter DC SUPER FLEX - Grinder; Replacing a Grinder

22
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
The cutter comes with a hose reelard DC SUPER FLEX
Angle Grinder (SFAG).
7.3 Grinder
Dancutter provides various other types of grinders, however,
for different purposes and with different properties. These are
illustrated below.
DC SUPER FLEX Angle Grinder
- Standard tted
Powerful motor covering most tasks:
Ø75 - 150 mm pipe
DC SUPER FLEX Straight Grinder
- Additional equipment
Ø75 - 150 mm pipe
Raise the arm so that the 5 mm Allen key can be inserted and
loosen the screw on both sides.
7.3.1 Replacing the grinder
The grinder can then be pulled out and replaced.
Install the Grinder in reverse order.
7.3.1