Dancutter DC SUPER FLEX - 9 Cutting Tools; Tools for Cutting PVC and Liners

32
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
DJ1938-14
The standard cutter is equipped with an AG 50 air engine, where
air is blown forward to blow dust away from the camera.
The cutting tool is replaced by using the Allen key supplied.
It may be necessary to clean the bolt in the grin ding motor,
bywhichtheconemillingtoolissecuredrst.
DK3015-16
Dancutter recommends using the following cutter heads for re-opening of laterals.
DK3713-16
DK2020-18
DK4623-16
DK2629-16
Specials tools for DK3713-16
Special tool DK3713-V - DK3713-B
9.0 Cutting tools
9.1 Tools for cutting PVC & LINER