Dancutter DC SUPER FLEX - Table of Contents

2
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
Contents
User Manual, DC SUPER FLEX ...................................................................................................... 1
Table of Contents
.............................................................................................................. 2
1.0 Manufacturer ...................................................................................................................... 3
1.1 Distributor ...............................................................................................................3
1.2 Authorised Representative .................................................................................... 3
2.0 Model type .......................................................................................................................... 4
3.0 Specications
..................................................................................................................... 4
4.0 Safety instructions ............................................................................................................. 4
5.0 Quickguide .......................................................................................................................... 5
5.1 Checklist ............................................................................................................................. 7
6.0 DC SUPER FLEX ................................................................................................................. 8
7.0 User instructions ...................................................................................................10
7.1 Hose reel ...........................................................................................................................15
7.1.1 Water separator and oil lubricator ...................................................................16
7.1.2 Camera cleaner tank ........................................................................................17
7.2 Cutter ................................................................................................................................18
7.2.1 Attaching the centring tool set with brushes ..................................................19
7.2.2 Attaching the centring tool set with wheels ....................................................20
7.3 Grinder ..............................................................................................................................22
7.3.1 Replacing a grinder ........................................................................................... 22
7.4 Control unit ....................................................................................................................... 23
8.0 Service and maintenance .......................................................................................26
8.1 Grinder ..............................................................................................................................26
8.2 Clean underneath the cover ............................................................................................26
8.3 Clean behind arm/swivel support ................................................................................... 27
8.4 Clean the forward/back drive ..........................................................................................27
8.5 Clean the rotation function ..............................................................................................28
8.6 Maintaining the control unit ............................................................................................28
8.7 Drum shaft ........................................................................................................................29
8.8 Waterlter ........................................................................................................................29
8.9 Grabber .............................................................................................................................30
Service overview ..............................................................................................................31
9.0 Cutting tools ..........................................................................................................32
9.1 Tools for cutting PVC and liners .....................................................................................32
9.2 Tools for cutting concrete ...............................................................................................33
9.3 Tools for cutting steel ......................................................................................................34
9.4 Attachment instructions for cutting tools ......................................................................35
10.0 Quickguide FPV headset ........................................................................................41
11.0 EU Declaration of Conformity .................................................................................42