13
20-06-2023
50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
Disconnect the air supply.
Make sure the tank is depressurised.
After use, place the cutter in the hose reel so that the
grinder is vertical, so that any moisture formation can
drain out of the grinder and into the hose.
REMOVE SUPPLY HOSE
CLOSED
OPEN
POSITION BALL VALVES
AS SHOWN
To Next Page
Loading...