Dancutter DC SUPER FLEX - Page 39

39
20-06-2023 50400 >
In the event of new product developments, Dancutter reserves the right to change the technical description without advance notice.
Authorised Representative in the United Kingdom: Mini-Cam Limited Unit 33, Ravenscraig Road, Little Hulton, Salford, M38 9PU.
© Copyright 2021 Dancutter A/S. Dancutter A/S is a Halma Company. Dancutter A/S, Livøvej 1 A, DK-8800 Viborg, +45 9651 2150, info@dancutter.dk, dancutter.com
9.4 Attachment instructions
for cutting tools
DD9010 - Cutting disc 65 x 1,1 mm
F70560 -
DC SUPER FLEX
Angle Grinder
F00070 - Washer 10 mm
536-394-2-Wheelnutange
536-393-2 -
Wheelholderange