VI.KT.G6.02 © Danfoss | 2016.05 | 39
Installation
The ECL Comfort controller is a universal controller that can be used for various systems.
Based on the shown standard systems, it is possible to congure additional systems.
In this section you nd the most frequently used systems. If your system is not quite as
shown below, nd the diagram which has the best resemblance with your system and
make your own combinations.
Heating system 1: District heating circuit with heat exchanger
Heating system 2: District heating circuit with direct connection
Danfoss
87H2161.10
How to identify your system type
To Next Page
Loading...
Need help?
General
